Bruce Raynor, Proprietor
DOTmed user since August 2010
Part Number: Z103721
Tubes, connectors, vessels
This is a basic glass kit missing a couple of pieces, but mostly complete and unused. What you see in the pics is what you will received. The P/N does not correspond to any current product made by... view more
Asking Price:
$99 USD
VISA, MasterCard, e-Transfer (Canada) or wire transfer payment accepted. Includes a 7 day inspection warranty. This unit appears in good condition. It is used and has not been refurbished. ... view more
Asking Price:$199 USD
$149 USD
(25% Off)
Part Number: AD-3 DIS-1
analog Delay / Windows Discriminator
I have two sets of these modules. They came with some other BAK equipment which has been sold. They are believed to be in good working order, however they are almost 30 years old. According to... view more
Asking Price:
$199 USD
Part Number: HL-4
Swing Bucket ROTOR with 4 buckets & trays
Tested and complete with 4 stainless bucket trays ( P/N 598 & DuPont 00848). There are no evident issues. The centrifuge on which this was were tested can be had for $500 including this rotor and... view more
Asking Price:
$399 USD
Part Number: FB / A-4-81
4 bucket ROTOR - 64 x 10 ML
The aluminium swing bucket rotor currently has four 16 position trays installed. It has been tested without issue in a New Brunswick Scientific 103N centrifuge (available) at the maximum rated... view more
Asking Price:
$299 USD
Part Number: 870
Fixed Position Rotor 50 ML x 8
No apparent damage or balance issues. MAX 19,500 RCF/45,500 RPM. The seal looks fine, but is at least 5 years old. This rotor is used but in good condition. US/Canada shipping will be under $60. ... view more
Asking Price:
$750 USD
This dual lamp light source powers up and passes its filter 2 test, but not the filter 1 test. There is no damage to the case, LED indicators, scope port or control surfaces. The lamp appears... view more
Asking Price:
$99 USD
This unit powers up and responds to controls. There is no damage to the case, scope port or control covers. It does indicate a fault on power up which seems to be the lamp. It is priced... view more
Asking Price:
$99 USD
This is an older unit in good operational condition. There are few scuffs and scrapes on the outer housing but the fan and controls work fine. No manual or other accessories are included. ... view more
Asking Price:
$65 USD
The model 20403 Prism monitor comes with SPO2 and ECG 3 lead sensors. It has a bright & responsive display and controls and there is no damage on the housing or input ports. This configuration... view more
Asking Price:$198 USD
$99 USD
(50% Off)
Part Number: 117335
Recorder printer
Tested and found to be in good working order. Other modules and a MPS monitor are available in the Raynor Shine DOTmed stare accessed by way of the green tap n the right of this ad. Payment by... view more
Asking Price:
$175 USD
Part Number: 117345
CO2 module & Capnostat sensor
Dinamap MPS module tested and found to be in good working order. Included is a Drager Capnostat sensor tested on this module and found to be without issue.. Payment by PayPal, VISA or MasterCard.... view more
Asking Price:
$395 USD
Part Number: 117322
ECG, temperature module
DINAMAP MPS module tested and found to be in good working order. Included are a three lead ECG trunk (made by Physio Controls) and temperature probe lead (6') Payment by PayPal, VISA or MasterCard.... view more
Asking Price:
$275 USD
Part Number: 117310
SPO2 module & sensor
Dinamap MPS module tested and found to be in good working order. Included is a reusable (used) Nellcor DS100A adult finger sensor Payment by PayPal, VISA or MasterCard. Shipping to the US or... view more
Asking Price:
$285 USD
Part Number: 117300
NIBP
Dinamap MPS Select module tested and found to be in good working order. If available at the time of sale a cuff with the appropriate connector will be included for an extra $10 Payment by PayPal,... view more
Asking Price:
$175 USD