by
Lauren Dubinsky, Senior Reporter | May 30, 2017
A simulation of a patient undergoing
a MR scan modified by metasurface
Scientists from the Netherlands and Russia developed a metasurface-based technology for MR scanners that has the potential to either reduce acquisition time or improve image quality.
MR imaging provides valuable structural and functional information, but it requires more time than CT or ultrasound to acquire an image because of its low signal-to-noise ratio.
The metasurface, which is composed of conducting copper strips, is positioned between the patient and the receive coil arrays during the exam to enhance the signal-to-noise ratio in the region of interest.
Ad Statistics
Times Displayed: 75267
Times Visited: 5317 MIT labs, experts in Multi-Vendor component level repair of: MRI Coils, RF amplifiers, Gradient Amplifiers Contrast Media Injectors. System repairs, sub-assembly repairs, component level repairs, refurbish/calibrate. info@mitlabsusa.com/+1 (305) 470-8013
The scientists from Leiden University Medical Center and ITMO University tested the metasurface on human patients and found that it increases local sensitivity by 50 percent. The results of the study were published in
Scientific Reports.
MR scans often have to be repeated many times, and the signals then need to be added together. However, the scientists found that the metasurface obviates that.
"Conventionally, if an examination now takes twenty minutes, it may only need ten in the future," Alexey Slobozhanyuk, research fellow at ITMO University, said in a statement. "If today hospitals serve ten patients a day, they will be able to serve twenty with our development."
Alternatively, instead of accelerating the procedure, the metasurface could be used to increase the image resolution, since the size of the 3-D pixel is also limited by the signal-to-noise ratio.
Historically, it has been a challenge to create a technology like this because the dimensions of the metamaterials were too large to integrate into close-fitting receive coil arrays. The scientists solved that by pioneering an ultra-thin design.
"Our technology can be applied for producing metamaterial-inspired ultra-thin devices for many different types of MRI scans, but in each case, one should, first, carry out a series of computer simulations as we have done in this work," said Rita Schmidt, first author of the study and researcher at Leiden University Medical Center. "One needs to make sure that the metasurface is appropriately coupled."
