There will be a 3% CC/PayPal fee added if checking out through the shopping cart
Synthes Small Fragment LC-DCP Set w/Self-Tapping Screws:
(1) Graphic Case
3.5mm Cortex Screws, Self-Tapping:
(8) 204.810 10mm
(8) 204.812 12mm
(8) 204.814 14mm
(8) 204.816 16mm
(8) 204.818 18mm
(8) 204.820 20mm
(8) 204.822 22mm
(8) 204.824 24mm
(8) 204.826 26mm
(8) 204.828 28mm
(8) 204.830 30mm
(8) 204.832 32mm
(6) 204.834 34mm
(6) 204.836 36mm
(6) 204.838 38mm
(6) 204.840 40mm
(6) 204.845 45mm
(6) 204.850 50mm
(6) 219.98 Washers
3.5mm Shaft Screws:
(2) 204.216 16mm
(2) 204.218 18mm
(2) 204.220 20mm
(2) 204.222 22mm
(2) 204.224 24mm
(2) 204.226 26mm
(2) 204.228 28mm
(2) 204.230 30mm
(2) 204.232 32mm
(2) 204.234 34mm
(2) 204.236 36mm
(2) 204.238 38mm
4.0mm Cancellous Screws, Partial Thread:
(6) 207.010 10mm
(6) 207.012 12mm
(6) 207.014 14mm
(6) 207.016 16mm
(6) 207.018 18mm
(6) 207.020 20mm
(6) 207.022 22mm
(6) 207.024 24mm
(6) 207.026 26mm
(6) 207.028 28mm
(6) 207.030 30mm
(6) 207.035 35mm
(6) 207.040 40mm
(6) 207.045 45mm
(6) 207.050 50mm
4.0mm Cancellous Screws, Fully Threaded:
(6) 206.010 10mm
(6) 206.012 12mm
(6) 206.014 14mm
(6) 206.016 16mm
(6) 206.018 18mm
(6) 206.020 20mm
(6) 206.022 22mm
(6) 206.024 24mm
(6) 206.026 26mm
(6) 206.028 28mm
(6) 206.030 30mm
(6) 206.035 35mm
(6) 206.040 40mm
(6) 206.045 45mm
(6) 206.050 50mm
(4) 206.055 55mm
(4) 206.060 60mm
3.5mm LC-DCP Plates:
(1) 223.60 10 Hole
(1) 223.59 9 Hole
(1) 223.58 8 Hole
(1) 223.57 7 Hole
(1) 223.56 6 Hole
1/3 Tubular Plates:
(1) 241.32 2 Hole
(1) 241.33 3 Hole
(1) 241.34 4 Hole
(1) 241.35 5 Hole
(1) 241.36 6 Hole
(1) 241.37 7 Hole
(1) 241.38 8 Hole
(1) 241.40 10 Hole
Cloverleaf Plates:
(1) 241.83 3 Hole
(1) 241.84 4 Hole
Oblique T Plates:
(1) 241.25 5 Hole
(1) 241.24 4 Hole
(1) 241.23 3 Hole
Small T Plates:
(1) 241.15 5 Hole
(1) 241.13 3 Hole
Instrumentation:
(1) 399.99 Reduction Forceps
(1) 398.40 Narrow Forceps
(1) 398.41 Broad Forceps
(1) 319.39 Sharp Hook
(2) 399.19 Hohmann Retractors
(2) 399.49 Hohmann Retractors
(1) 399.36 Periosteal Elevator
(1) 312.30 2.5mm/3.5mm Sleeve
(1) 314.03 QC Screwdriver Shaft
(1) 310.89 Sm. Countersink
(10) 292.12 1.25mm K-Wires
(10) 292.16 1.6mm K-Wires
(10) 292.20 2.0mm K-Wires
(3) 310.25 2.5mm Drill Bit (Gold)
(2) 310.35 3.5mm Drill Bit
(2) 311.32 3.5mm Tap (Gold)
(2) 311.34 4.0mm Tap
(1) 329.87 Bending Template
(1) 329.89 Bending Template
(1) 329.15 Bending Pliers
(1) 395.91 Drill Sleeve
(1) 398.80 Plate Holding Forceps
(1) 312.28 2.5mm/3.5mm Drill Guide
(1) 312.20 2.0mm Drill Guide
(1) 323.36 2.5mm/3.5mm Universal Drill Guide
(1) 323.35 2.5mm Neutral/Load LC-DCP Drill Guide
(2) 392.00 Bending Iron for K-Wires
(1) 311.44 Tap Handle
(1) 319.97 Screw Forceps
(1) 319.04 Depth Gauge
(1) 314.02 Small Hex Screwdriver
(1) 314.06 Holding Sleeve
(2) 329.05 Plate Bending Irons
(1) 391.82 Wire Bending Pliers
Return Policy
Items are sold as-is with no returns or refunds available unless explicitly stated.
