For Sale SYNTHES -DHS/DCS-One-Step-Basic-Set-ST DHS/DCS One-Step Basic Set, Self-Tapping

There will be a 3% CC/PayPal fee added if checking out through the shopping cart

Synthes DHS/DCS One-Step Basic Set, Self-Tapping:

(1) Sterilization Case
(1) 338.08 T-Handle
(1) 338.01 135° Angle Guide
(1) 338.02 140° Angle Guide
(1) 338.03 145° Angle Guide
(1) 338.04 150° Angle Guide
(1) 338.05 Direct Measuring Device
(1) 338.44 Reaming Head Short
(1) 338.11 Reaming Head Standard
(1) Locking Nut
(1) 338.10 Drill Bit
(1) 338.41 DCS Angle Guide
(1) 338.47 DCS Reaming Head
(1) 314.27 Large Hex Screwdriver
(1) 314.11 Holding Sleeve
(1) 319.10 Depth Gauge
(1) 311.44 T-Handle
(1) 319.97 Screw Forceps
(1) 322.43 Neutral/Load Drill Guide
(1) 312.46 3.2/4.5mm Drill Guide
(1) 338.22 Coupling Screw for Removal
(1) 338.28 Impactor Handle
(1) 338.26 Impactor Tip
(1) 338.31 Coupling Screw
(1) 338.302 One-Step Insertion Wrench
(1) 338.17 12.5mm Tap
(1) 338.18 Sleeve for Tap
(1) 338.32 Centering Sleeve for Wrench
(2) 310.19 2.0mm Drill Bit
(8) 338.002.5mm Threaded Guide Wire
(4) 292.20 2.0mm K-Wire
(2) 310.31 3.2mm Drill Bit
(2) 310.44 4.5mm Drill Bit
(2) 311.46 4.5mm Tap
(1) 312.48 3.2/4.5mm Drill Sleeve
(1) 314.15 Hex Screwdriver Shaft
4.5mm Cortex Screws, Self-Tapping:
(3) 28mm - 30mm
(8) 32mm - 38mm
(10) 40mm
(8) 42mm
(6) 44mm - 46mm
(3) 48mm - 54mm

Return Policy

Items are sold as-is with no returns or refunds available unless explicitly stated.