Here is a Namocell Pala NI006 Single Cell Dispenser
Predecessor to:
Current model
Condition:
This Namocell Pala NI006 Single Cell Dispenser is in good working condition.
Please see the exact video and photos below.
Testing we performed:
The Namocell Pala NI006 Single Cell Dispenser passed all tests and was found to be fully functional:
Tested Power On & Initialization: PASSED
Tested Communication with Pala Software v3.6.2.1: PASSED
Tested All Plate Carrier Positions: PASSED
Tested Camera Communication & Controls: PASSED
Tested Cartridge Holder Open & Close: PASSED
Tested Sheath & Waste Valves: PASSED
Tested Onboard Air Pump: PASSED
Tested & Calibrated Sheath Bottle Level Sensing: PASSED
Tested & Calibrated Waste Bottle Level Sensing: PASSED
Tested Laser 1 (488nm Blue): PASSED
System consists of:
Namocell Pala NI006 Single Cell Dispenser (1 Laser, 3 Detectors)
Laptop with Pala Software v3.6.2.1
Power & Communication Cables
This Pala is configured with a 488nm Laser and a Detection channel for FITC. This is not a two laser system.
Configuration and Setup:
(1) Laser: 488nm Blue
Channel Filter: (Blue) 527/32, FITC, GFP, YFP
Light Scatter: Forward (FSC) & Side (TSC)
(3) Detection Channels
Sorting Modes: Single Cell Dispensing, Bulk Cell Sorting, and Target Cell Enrichment.
Sorting pressure: less than 2 psi
Dispensing Format: 96- or 384-well plate, or microcentrifuge tube
Sorting time: 1 min/96-well plate; 6 min/384-well plate
Dispensing Volume: 1 uL/cell
Minimum cell input 100
Input Sample Volume: 100 – 600 uL
Input Sample Density: 100 cells – 150M cells/mL
Initialization Time: 5 minutes
Sheath Consumption: 6.5 mL/hr
Dimensions (WxDxH): 25 x 14 x 9 in (64 x 36 x 23 cm)
Weight: 35lbs (16kg)
Power: 100 - 240 VAC. 50/60 Hz
Video Description:
The video below gives an overview of the Namocell Pala NI006 Single Cell Dispenser, and also demonstrates its functionality.
TO VIEW ADDITIONAL PHOTOS, VIDEOS AND VERY DETAILED INFORMATION SUCH AS TEST STEPS PERFORMED, CONFIGURATION, ETC., PLEASE VISIT OUR WEB SITE. TO GET THERE PLEASE CLICK ON “WEBSTORE”; TO YOUR RIGHT AND YOU WILL SEE LINK TO OUR SITE IN THE MIDDLE OF THE SCREEN. THEN USE LAST 5 DIGITS OF MPN NUMBER IN THE SEARCH FIELD TO LOCATE YOUR ITEM.
DO NOT HESITATE TO CALL US OR EMAIL US WITH ANY QUESTIONS YOU MIGHT HAVE.
ALL OF OUR ITEMS ARE AVAILABLE FOR INSPECTION AT OUR FACILITY.
Return Policy
Items are sold as-is with no returns or refunds available unless explicitly stated.