For Sale SYNTHES Self-Tapping-Small-Fragment-Set LCP Self-Tapping Locking Small Fragment Set (#2)

Includes:
690.347 Set Tray
329.97 Bending Template 7 Holes for 4.5 mm LC-DCP Plates
329.890 Bending Template for LC-DCP 3.5 length 87mm
329.820 Bending Template for LC-DCP 3.5 length 153mm
(x2) 245.121 3.5 mm LCP Reconstruction Plate 12 Holes/168 mm
(x2) 245.101 3.5 mm LCP RECONSTRUCTION PLATE 10 HOLES/140 mm
(x2) 245.081 3.5 mm LCP RECONSTRUCTION PLATE 8 HOLES/112 mm
(x2) 245.071 3.5 mm LCP RECONSTRUCTION PLATE 7 HOLES/98 mm
(x2) 245.061 3.5 mm LCP RECONSTRUCTION PLATE 6 HOLES/84 mm
(x2) 245.051 3.5 mm LCP RECONSTRUCTION PLATE 5 HOLES/70 mm
241.031 3.5 mm LCP T-PLATE 3H HEAD/ 3H SHAFT/52 mmOBLIQUE RIGHT
241.141 3.5 mm LCP T-PLATE 4H HEAD/ 4H SHAFT/56 mmRIGHT ANGLE
241.161 3.5 mm LCP T-PLATE 4H HEAD/ 6H SHAFT/78 mmRIGHT ANGLE
241.171 3.5 mm LCP T-PLATE 3H HEAD/ 7H SHAFT/87 mmRIGHT ANGLE
241.901 3.5 mm LCP® PROXIMAL HUMERUS PLATE-STANDARD 3H SHAFT/90 mm
241.903 3.5 mm LCP® PROXIMAL HUMERUS PLATE-STANDARD 5H SHAFT/114 mm
241.931 3.5 mm LCP T-PLATE 3H HEAD/ 3H SHAFT/52 mmOBLIQUE LEFT
241.941 3.5 mm LCP T-PLATE 3H HEAD/ 4H SHAFT/63 mmOBLIQUE LEFT
241.951 3.5 mm LCP T-PLATE 3H HEAD/ 5H SHAFT/74 mmOBLIQUE LEFT
241.971 3.5 mm LCP T-PLATE 3H HEAD/ 7H SHAFT/96 mmOBLIQUE LEFT
241.071 3.5 mm LCP T-PLATE 3H HEAD/ 7H SHAFT/96 mmOBLIQUE RIGHT
241.051 3.5 mm LCP T-PLATE 3H HEAD/ 5H SHAFT/74 mmOBLIQUE RIGHT
241.041 3.5 mm LCP T-PLATE 3H HEAD/ 4H SHAFT/63 mmOBLIQUE RIGHT
314.020 Screwdriver, Hexagonal Small with Holding Sleeve
314.115 STARDRIVE(TM) SCREWDRIVER T15
310.21 2.0 mm DRILL BIT/QC/125 mm
(x2) 310.288 2.8 mm DRILL BIT/QC/165 mm
(x2) 311.32 TAP FOR 3.5 mm CORTEX SCREWS GOLD/110 mm
(x2) 311.34 TAP FOR 4.0 mm CANCELLOUS BONE SCREWS/110 mm
314.030 Screwdriver Shaft, Hexagonal Small, 2.5mm
323.050 INSERTION GUIDE
(x2) 323.053 3.5 mm LOCKING SCREW SLEEVE
(x2) 323.054 2.8 mm DRILL SLEEVE
(x2) 323.055 1.6 mm WIRE SLEEVE
324.024 PUSH-PULL REDUCTION DEVICE
311.43 HANDLE WITH QUICK COUPLING, SMALL
323.025 DIRECT MEASURING DEVICE
(x3) 312.648 2.8 mm THREADED DRILL GUIDE
312.20 2.0 mm PARALLEL DRILL GUIDE AND DRILL SLEEVE
319.01 DEPTH GAUGE FOR 2.7 mm & SMALL SCREWS
324.023 THREADED PLATE HOLDER
324.031 THREADED PLATE HOLDER-LONG FOR 3.5 mm LOCKING HOLE
399.091 BONE HOLDING FORCEPS-SOFT RATCHET F/PLATES TO 9 mm WIDE
(x2) 329.070 Plate Bending Iron
392.000 Bending Iron
391.82 WIRE-BENDING PLIERS 160 mm
398.811 PLATE HOLDING FORCEPS WITH SWIVEL FOOT/SIZE 0

Good condition, signs of use present on units as shown such as staining/marks. Mismatched tray lid, but the set itself is the self-tapping screw set. See photos for more details, sold as is.
(Tray #2, other variation listed as well.)
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.

DISCLAIMER: Regardless of the origin of the equipment, documentation provided or identification appearing upon the equipment, the equipment described and offered here is in no way certified for, recommended for, or offered for any specific use. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with the equipment. The purchaser, by bidding on this equipment, indicates their acknowledgment of, and agreement to the terms of this disclaimer.


This unit is located in North Carolina

Return Policy

Items are sold as-is with no returns or refunds available unless explicitly stated.