Here is a Molecular Devices ClonePix 2 Clone Screening System with Compressor
This is the same model as Molecular Devcies ClonePix 2 Mammalian Colony Picker just branded by Genetix
Predecessor to:
Current model.
Condition:
This Genetix ClonePix 2 Clone Screening System is in good working condition.
Please see exact photos and video below.
Testing we performed:
The Genetix ClonePix 2 Clone Screening System passed all tests and was found to be fully functional:
Power: PASSED
Communication with software: PASSED
Initialization and homing: PASSED
Single plate method to test all mechanical functions: PASSED
Camera imaging: PASSED
Colony reconition and picking: PASSED
UV and interior lighting: PASSED
Emergency stop: PASSED
System consists of:
Genetix ClonePix 2 Clone Screening System
Source and destination stacker racks for built in plate stackers
Source and waste bottles with quick connect caps (2 x 5 liter; 2 x 2 liter)
1.5 gallon silent piston compressor 100-130 psi
Computer with running applicable software
Monitor, keyboard, mouse swing arm mounted to the side of the unit
Power and communication cables and air line
Configuration and Setup:
Imaging:
Software Dedicated imaging software pre-installed on a high-specification PC
White light imaging:
-Trans-illumination for imaging low contrast colonies such as adherent monolayers or small colonies in suspension
- Epi-illumination for imaging colonies as they are collected
Fluorescence imaging:
- Software-controlled switching between up to 5 excitation /emission filter pairs (we recommend no more than 3 filters be multiplexed for optimal performance)
Data tracking: internal barcode reader for source and destination plates enables data tracking for each run
Camera: Integrated 16-bit cooled CCD camera
Imaging speed for 6-well microplate: 5 min for 2 wavelengths (standard conditions)
Resolution: Standard: 28 micron; Maximum: 1.5 micron
Instrumentation:
Source plate type: PetriWell-6 plate, PetriWell-1 plate, Greiner 6 well plate, Nunc 6 well plate, Nunc OmniTray
Destination plate type: PetriWell-96 plate, Costar 96 well plate, Greiner 96 well plate, Nunc 96 well plate, Falcon 96 well plate
Source and Destination plate capacity: 10 plates
Picking Head: 8 x picking pins - each pin independently controlled
Picking Speed: > 200 clones per hour
Dimensions (W x D x H): 101 x 90 x 149 cm
Weight: 350 kg
Compressed air specifications:
Air Clean, oil-free with sub-micron filtration
Minimum operating pressure: 6 bar (~90psi)
Minimum operating volume: 80 L/min
Grow your cells in semi-solid media, forming discrete clonal colonies
Rapid screening of thousands of clones increases your probability of finding optimal producers exponentially
- Visualize colonies for imaging and picking in white light
- Observe expression levels using fluorescence imaging
Choice of detection methods enables:
- Label-free detection of clones independent of secretion
- Detection of tagged recombinant proteins and expression markers
- Fluorescence detection of secreted IgG, IgM, or antigen-specific mAbs from hybridomas
Objective image analysis lets you select colonies with optimal expression levels and reject poor performers early
Video Description:
The video below gives an overview of the Genetix ClonePix 2 Clone Screening System and demonstrates its functionality
TO VIEW ADDITIONAL PHOTOS, VIDEOS AND VERY DETAILED INFORMATION SUCH AS TEST STEPS PERFORMED, CONFIGURATION, ETC., PLEASE VISIT OUR WEB SITE. TO GET THERE PLEASE CLICK ON “WEBSTORE”; TO YOUR RIGHT AND YOU WILL SEE LINK TO OUR SITE IN THE MIDDLE OF THE SCREEN. THEN USE LAST 5 DIGITS OF MPN NUMBER IN THE SEARCH FIELD TO LOCATE YOUR ITEM.
DO NOT HESITATE TO CALL US OR EMAIL US WITH ANY QUESTIONS YOU MIGHT HAVE.
ALL OF OUR ITEMS ARE AVAILABLE FOR INSPECTION AT OUR FACILITY.
Return Policy
Items are sold as-is with no returns or refunds available unless explicitly stated.
