Seller assumes all responsibility for this listing..
Listing: #3740012
This is a nice 220 volt Labogene ScanSpeed 416 Slow Speed Centrifuge in excellent cosmetic and tested working condition. Comes with a MRS-d60/15-2 rotor that holds 4 buckets (buckets not included).The rotor is designed for (4) 3" diameter buckets. 1- 99 minute timer with a fast run up/down time. A great centrifuge for any laboratory. Metal lid with a viewing port and the safety lid lock is working. Emergency door open hole. Stainless steel drum is in excellent condition. All seals are good. This unit comes with two power cords for different outlet types. Variable speed from 500-4000 rpm. Ready to use as soon as you acquire the buckets! Guaranteed not to be DOA. Several style buckets are available from the Labogene website.
Specifics
Labogene ScanSpeed 416 Slow Speed Centrifugeis a low-speed benchtop centrifuge with soft start/stop for gentle acceleration and deceleration. It comes with memory for 10 programs and alarms for imbalances, overheating and overspeed as well as a automatic lid release. Possible to choose between a fixed angle rotor for 16x15 mL or swing-out rotors for 6x50 mL or 8x15 mL tubes.
The centrifuge is ideal for general laboratory applications including biological sample separations of cellular materials, blood, urine, sperm etc. As well as clinical applications including PRP, PRF, lipid cell separation and stem cell isolation.
In addition, it is also recommended for low-speed gentle centrifugation of microbead containing microplates and gentle soft spin-down or washing of primary cells and cell lines.
This unit is in excellent cosmetic and tested working condition with minorsigns of previous use. Does come with a rotor but no buckets. 3" buckets will have to be acquired before this centrifuge can be used. I thoroughly tested this centrifuge and it is working exactly as it was designed to. Super easy to operate and very quiet while running. The speed control is working with the timer. Easy to read digital display. Very nice 6year old centrifuge. When set on low it ran at 500 rpm and on high it ran at 4000 rpm according to the setting selected and confirmed by our RPM gauge. The safety lid lock is working. The stainless steel tub is immaculate. Guaranteed not to be DOA.
Age
DOM: 01/14/2015
Dimensions
Overall Dimensions: 15" wide x 18.5" deep x 12.25" tall
Power Cords: 1 - 6' and 1 - 10'
Uses 3" diameter buckets (not included)
Warranty
I stand behind everything I sell and for 30 days I guarantee this Labogene ScanSpeed 416 Low Speed Centrifuge 4pl Swinging Bucket Rotor 4000 RPMis exact to the description and pictures I have provided here or return it for a refund
Shipping
Weight before packing is 48 lbs for everything pictured
All buyers may use the shipping calculator
Pickup is always welcome from our warehouse in Coolidge Az (40 miles south of Phoenix Az near I-10)
If the shipping calculator wont give you a shipping cost you must contact me for a shipping quote.
"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not buy this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item."
Regardless of the origin of the equipment, documentation provided or identification appearing upon the equipment, the equipment described and offered here is in no way certified for, recommended for, or offered for any specific use. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with the equipment.. The purchaser, indicates their acknowledgment of, and agreement to the terms of this disclaimer. There are no warranties which extend beyond the description on the face hereof. This item has been cleaned and handled in accordance with the manufacturer's instructions..
, , Coolidge Arizona,
