MPN: 5247
Eppendorf Femtojet 5247 programmable microinjector, service required
The FemtoJet enables minute quantities of liquid to be injected into cells.The relevant parameters (injection pressure p_i and injection time t_i)are set using the variable regulators. The key or connected hand orfoot control (not included) or the INJECT key of the connected micromanipulator areused to trigger these two parameters. If no injections are being performed,compensation pressure p_c is applied permanently
Voltage/Frequency: 100 V 240 V 10 %, 50 60 Hz
Set voltage: adapts automatically
Fuse for 100 240 V: T1.0 A, 250 V (2 pcs.)
Power consumption: 50 W
Max. current consumption: < 0.5 A
Protection class: I
Overvoltage category: II (IEC 61010-1)
Pollution degree: 2 (IEC 664)
Ambient temperature: 15 C 35 C
Ambient relative humidity: max. 70 %
Weight: 6.2 kg
Dimensions: Width: 220 mmDepth: 170 mmHeight: 280 mm
Injection time t_i: 0.0 99.9 sin 0.1 s increments
Injection pressure p_i: 0 6,000 hPa (87 psi),in 1 hPa (0.010.02 psi) increments
Regulating accuracy: 1 % of value set in each case,at least 1 hPa
Compensation pressure p_c: 0 6,000 hPa (87 psi),in 1 hPa (0.010.02 psi) increments
Regulating accuracy: 1 % of value set in each case,at least 1 hPa
Clean rinsing pressure: max. approx. 7,000 hPa (102 psi)
RS 232 computer Baud rate: 9,600interface: Start bit: 1Data bits: 8Parity: nonStop bit: 1
Return Policy
30 Day Return Policy. Free Return. One month free returns for items sold within the United States. No returns for international shipments.